Hayward skimmer vacuum plate manual

The Hayward Skimmer Vac Plate is a great accessory for achieving a pool cleaning balance that automatically alternates between skimming and vacuuming with each cycle of the filtration system's time clock. Features include a pressure relief valve for safety and reinforced ABS construction for strength and durability. 1. Remove weir from front of skimmer. 2. Attach vacuum hose to vac head and handle, and fill vacuum hose with water (place over pool inlet). Place SKIM-VAC over skimmer basket. Going through the skimmer opening in the pool wall, attach the vacuum hose to the SKIM-VAC hose adapter. 3. Hold SKIM-VAC in place until any air hose is evacuated by pump. Once air is removed, the pump suction willFile Size: KB. Insert SKIM-VAC into skimmer and firmly place over basket. Hold SKIM-VAC in place until all air is evacuated from vacuum hose. Once the air is removed, the pump suction will hold the SKIM-VAC firmly in place. To remove SKIM-VAC, merely grasp the hose connection (near the plate) and give a sideward twist or briefly lift vacuum head from pool.

AUTOMATIC SURFACE SKIMMER Owner's Manual Models SPSP SERIES SKIM-MASTER Hayward Pool Products Division Street, Elizabeth, NJ Phone: () o Installation of a vacuum release or vent system, which relieves entrapping suction, is recommended. Hayward skimmer vacuum plate with /4-inch and /2-inch combo hose adapter is designed to fit Hayward swimming pool skimmer models SP, and , top cover styles. By utilizing the skimmer basket instead of the pump strainer basket, the need to turn the pump on and off is eliminated. 1. Remove weir from front of skimmer. 2. Attach vacuum hose to vac head and handle, and fill vacuum hose with water (place over pool inlet). Place SKIM-VAC over skimmer basket. Going through the skimmer opening in the pool wall, attach the vacuum hose to the SKIM-VAC hose adapter. 3. Hold SKIM-VAC in place until any air hose is evacuated by.

6. Align second gasket and face plate and fasten tightly to skimmer face with ten (10) 1" long screws. Use a large Phillips head screwdriver to drive these heavy duty screws. If vinyl liner pool, pierce liner through face plate holes one at a time prior to inserting screws. 7. Cut out liner along inside edges of face plate. Hayward Pool Products. AUTOMATIC SURFACE SKIMMER Owner’s Manual Models SPSP SERIES SKIM-MASTER IMPORTANT SAFETY INSTRUCTIONS Basic safety precautions should always be followed, including the following: Failure to follow instructions can cause severe in jury. Hayward Automatic Skimmer Vacuum Plate designed to adjust vacuum/water flow. To install the V Regulator Valve, turn the filter system off, remove the hose from the VC Skimmer Cone, and after closing the Regulator Valve (Rotate the blue collar clockwise until.