How to operate a manual hoyer lift






















With the legs of the base open and locked, use the steering handle to push the patient lift into position. 2. Lower the patient lift for easy attachment of the sling. • When the patient is clear of the bed surface, swing their feet off the bed. • Using the steering handle, move the lift away from the bed.  · This video demonstrates a dependent transfer from bed to wheelchair using a manual, hydraulic Hoyer Lift. Positioning the Lift for Use: 1. With the legs of the base open and locked, use the steering handle to push the patient lift into position. 2. Lower the patient lift for easy attachment of the sling. • When the patient is clear of the bed surface, swing their feet off the bed. • Using File Size: KB.


CAUTION - For patient use, refer to the separate manual, "How To Use a Patient Lifter." If you did not receive a copy or need additional copies contact: Joerns Healthcare at Using other manufacturers' parts on Hoyer products is unsafe and may result in serious injury to patient and/or attendant. Use only Hoyer parts. Hoyer. 2. Introduction: The Hoyer Advance Patient Lift The Hoyer Advance is available in two versions, hydraulically operated and electrically operated. This manual covers both Advance models. Each lift is fully assembled, load tested and certified before being packed/shipped. The electric powered lift, also can operate with one person. f. Having a Hoyer lift helps both the patient and the caregiver - safety and comfort. With Hoyer lift, he can move at ease. When should a Hoyer lift be used? Hoyer lifts are used for transfers when a person requires % assistance to get into and out of bed. A pad fits under the.


www.doorway.ru pump to raise boom to position for lifting patient. www.doorway.ru NOT lift up on end of boom to position for lifting patient as this causes air to be drawn in under ram, preventing pump from lifting when handle is pumped. www.doorway.ru NOT press down hard on handle when bottom of stroke is reached. Manual Lifting. Manual lifting requires that you find the valve at the base of a manual lift’s pump handle. If the valve is facing the pump handle, the lid is closed. When the valve is facing away from the pump, the boom can be lowered or raised. The movement from open to close should be performed gently. • When moving the consumer lift away from the bed, turn the consumer so that he/she faces assistant operating the consumer lift. • Press the DOWN button (electric) or open the control valve (manual/hydraulic) lowering consumer so that his feet rest on the base of the lift, straddling the mast. Close the control valve.

0コメント

  • 1000 / 1000