Kangaroo feeding pump manual

Kangaroo Enteral Feeding Pump with Pole Clamp. 1. Close the control clamp on the Kangaroo feeding set completely. 2. Fill feeding set bag with desired amount of formula. 3. Close and hand bag. 4. Ensure the formula fluid column hands 28” ( cm) above the top of the feeding pump at the start of feeding. A B Figure 4A Figure 4B 5. The battery will charge whenever the pump is plugged into a wall outlet, even when the OFF button has been pressed. beginning administration Below are general instructions for inserting all Sherwood Medical Pump Sets into the Kangaroo Feeding Pump. 1. Press ON. 2. Wait while pump performs system check. 3. KAnGAROO Enteral Feeding Pump Quick Reference Guide General Startup 1. Turn pump on - Press Q) POWER button in lower right-hand corner. 2. Prepare and load pump set (see instructions on pump) 3. Use the keys on the left side of the LCD screen to choose the menu selections for programming all settings. 4.

The KANGAROO JOEY Enteral Feeding Pump is a simple-to-use, precision enteral feeding pump. It is easily programmed to provide patients with either continuous or intermittent feeding, and can provide automatic flushing capability when used with KANGAROO. Demonstration of how to set up feeding tube and Kangaroo pump. We hope this will be helpful to current healthcare professional and healthcare www.doorway.ru racy, the fluid level in the feed-ing set bag must be 6 inches above the top of the feeding pump when the feeding cycle is initiated. 4. Fill the feed bag with water to approximately half of the total capacity. Properly seal the bag and shake for 5 to 10 seconds. 5. Empty the feed bag and repeat the last step until the bag contains clean water. 6.

The Kangaroo™ Connect enteral feeding pump is a portable rotary peristaltic enteral feeding pump, intended to provide enteral nutrition to a patient. It can be programmed to provide patients with continuous, dose, or bolus feeding when used with. KANGAROO JOEY Feeding Pump Instructions for use Key points: 1. Wash your hands with antibacterial soap before handling your feeding tube and supplies. 2. If you have more than one catheter (example: feeding tube and I.V.), always double check to make sure you are infusing your formula into the feeding tube and not into the I.V. line. 3. The Kangaroo™ ePump™ enteral feed and flush pump with pole clamp is a simple-to-use, precision enteral feeding pump. It is easily programmed to provide patients with either continuous or intermittent feeding, and can provide automatic flushing capability when used with Kangaroo™ ePump™ feed flush sets. Intended use.